#M5StackNew

#M5StackNew 🎉 PaperDIY Assembly & Complete Kit Released PaperDIY Assembly & Complete Kit are DIY e-paper development board kits, including main control board, 140mAh lithium battery, e-paper display and acrylic screen pressure plate, suitable for building desktop information displays, electronic labels, maker DIY projects, and embedded hardware development experiments. ✨Features ✅ ESP32-S3R8 core controller (16MB Flash, 8MB PSRAM, 2.4 GHz Wi-Fi) ✅ 4.7" e-paper display, 960×540 resolution, 16-level grayscale display ✅ Onboard DC 3.7V battery connector, Low-power power management design ✅ 140mAh lithium battery, microSD card slot * PaperDIY Assembly Kit: assembly completed by the user, PaperDIY Complete Kit: includes a pre-installed 3D-printed enclosure, with hardware assembly completed at the factory. 🛒 Get Yours: Official Store: PaperDIY Assembly Kit: PaperDIY Complete Kit: AliExpress: PaperDIY Assembly Kit: PaperDIY Complete Kit: #M5Stack #M5StackNew #IoT #EINK #EPaper #DIYElectronics #Makers

#M5StackNew 🎉 PaperMono & PaperMono-Lite Released PaperMono is an e-paper development board designed for low-power display, near-field identification, and long-range communication applications. PaperMono-Lite is a streamlined version of PaperMono. ✨Features ✅ESP32-S3R8 core controller, 16MB Flash, 8MB PSRAM, 2.4 GHz Wi-Fi ✅3.97-inch 4-level grayscale black-and-white e-paper display with touch support ✅Integrated front-light system, RGB LED & built-in 1150mAh battery ✅PDM microphone (LMD4737T261-AC02) & built-in buzzer ✅BMI270 6-axis IMU, M5IOE1 IO expander, microSD card slot, RX8130CE RTC ✅NFC functionality & LoRa communication supporting 868MHz ~ 923MHz (PaperMono Only) 🛒 Get Yours: Official Store: PaperMono: PaperMono-Lite: AliExpress: #M5Stack #PaperMono #EInk #Dashboard #LowPower #IoT #Maker #NFC #LoRa

#M5StackNew 🎉 StickC-Plus SE Released StickC-Plus SE is a lightweight version of StickC-Plus. It retains the core features while removing the onboard 6-axis IMU sensor, offering better cost efficiency. ✨Features ✅ESP32-PICO-D4 main controller ✅4MB Flash, 520KB SRAM, 2.4 GHz Wi-Fi ✅Onboard red status indicator, Integrated infrared transmitter ✅Built-in RTC module, Onboard microphone ✅Customizable buttons, LCD, power button, and reset button ✅Built-in 120 mAh lithium battery, Integrated passive buzzer 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #StickCPlusSE #IoT #Hardware #Makers #ESP32

#M5StackNew 🎉Atomic Audio-3.5 Base Released Atomic Audio-3.5 Base is a voice recognition and audio playback base designed for the Atom series controllers, ideal for building smart home voice gateways and interactive terminals. ✨Features ✅Built-in microphone and speaker ✅3.5mm audio jack, supports audio output + microphone input ✅Built-in insertion detection with automatic switching to external microphone line ✅Integrated ES8311 hi-fi audio codec, supporting 24-bit high-resolution audio processing ✅Supports full-duplex voice communication with simultaneous audio transmission and reception (Note: Not compatible with Atom Voice) 🛒 Get Yours: Shopify: AliExpress: #M5Stack #IoT #AtomSeries #AudioEngineering #VoiceControl #SmartHome #Makers

#M5StackNew 🎉Tab5 Keyboard Tab5 Keyboard is a 70-key physical keyboard input expansion module designed specifically for Tab5. It connects directly to the host via Tab5 Ext.Port1, enabling a plug-and-play input experience. ✅ Uses STM32F030C8T6 as the main control chip, designed for Tab5, plug and play via direct connection to the expansion port ✅ 14 x 5 matrix, supports multiple simultaneous key presses ✅ Three operating modes (Normal, HID, and Character) to meet diverse requirements ✅ I2C communication with low-latency reporting through an interrupt pin ✅ Onboard dual RGB LEDs for colorful status indication 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #Tab5 #Keyboard #IoT #Hardware #Makers #HumanComputerInteraction #TextInput #PortableDevices

#M5StackNew 🎉 PaperColor PaperColor is a development board featuring a 4-inch E Ink Spectra 6 full-color e-paper display with a resolution of 400x600, offering both low power consumption and high visibility. ✨Features ✅ESP32-S3R8 Core: 16MB Flash + 8MB PSRAM, 2.4 GHz Wi-Fi ✅ES8311 Audio Codec, 1W Speaker + MEMS Microphone ✅Built-in 1250mAh Battery, microSD Card Slot ✅Infrared Emitter, 2x RGB LED, RX8130CE Real-Time Clock ✅Onboard SHT40 Temperature & Humidity Sensor 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #PaperColor #ESP32S3 #EInk #EPaper #SmartDisplay #EmbeddedSystems #Makers

#M5StackNew 🎉 Cardputer Mesh Kit Released Cardputer Mesh Kit is a portable communication terminal kit that integrates LoRa Mesh networking with global positioning capabilities. The kit centers around the Cardputer-Adv core controller and the Cap LoRa-1262 communication expansion module and comes pre-installed with @TheMeshtastic firmware, making it ready to use out of the box. ✨Features ✅ Stamp-S3A core module (ESP32-S3FN8), 56-key keyboard, 1.14" LCD screen ✅ ES8311 audio codec + NS4150B amplifier + 1W speaker + MEMS microphone ✅ 3.5mm audio output jack, 6-axis IMU BMI270, Infrared emitter ✅ LoRa modulation technology + GNSS global positioning system ✅ Supports GPS / QZSS / BD2 / BD3 / GAL / GLO multi-constellation positioning 🛒 Get Yours: Shopify: #M5Stack #M5StackNew #Cardputer #LoRa #Meshtastic #ESP32 #GPS #Hardware #Makers #IoT

#M5StackNew 🎉 Base M5GO Bottom2 v1.3 Released Base M5GO Bottom2 v1.3 is an expansion base designed specifically for the M5Stack Core2 series, integrating motion sensing, audio input, programmable RGB lighting, and a built-in battery for IoT and interactive projects. ✨ Features ✅ Compatible with the Core2 series ✅ Digital microphone, programmable LED light bar, 500mAh lithium battery ✅ HY2.0-4P expansion ports, compatible with LEGO brick structures ✅ Magnetic attachment design on the back 🛒 Get Yours: Official Store: AliExpress: #M5Stack #M5StackNew #IoT #Hardware #Makers #Core2 #MotionSensing #RGB #Prototyping

#M5StackNew 🎉 StopWatch StopWatch is a portable AMOLED round touch development board designed for interactive and wearable scenarios, integrating display, touch, audio and motion sensing into one compact device. ✨Features ✅ ESP32-S3R8 core controller with 16MB Flash, 8MB PSRAM, and 2.4GHz Wi-Fi ✅ 1.75" AMOLED Touch Round Display, 2 x Programmable Buttons, 1 x Power Button ✅ Built-in Vibration Motor, 6-axis IMU BMI270, RX8130CE RTC ✅ ES8311 Audio Codec, MEMS MIC, AW8737A Amplifier for audio input and output ✅ HY2.0-4P Expansion Interface, M5PM1 Multi-level Power Management System, Built-in 450mAh Battery 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #ESP32S3 #AMOLED #WearableTech #Embedded #HMI #TouchDisplay #SmartDevices

#M5StackNew 🎉 Atom-Matrix v1.1 Released Atom-Matrix v1.1 is an iterative upgrade of the Atom-Matrix. This product replaces the MPU6886 from the previous generation with a BMI270 six-axis IMU sensor. ✨Features ✅Based on ESP32, Compact form factor, Programmable button ✅Built-in 3-axis gyroscope and 3-axis accelerometer (I2C Address: 0x68) ✅RGB LED matrix display, Infrared transmission capability, Expandable pins and interfaces 🛒 Get Yours: Shopify: #M5Stack #M5StackNew #IoT #AtomMatrix #ESP32 #Hardware #Makers #BMI270 #MotionControl #SmartHome

#M5StackNew 🎉 Grove Converter Released Grove Converter is a Unit interface combination connector. It features two male HY2.0-4P connectors and one female HY2.0-4P connector, all interconnected to allow flexible connections between controllers and expansion modules. ✨Features ✅ Multiple mounting options: M3 hanging holes, M3 nut slots, LEGO-compatible holes ✅ USB Type-C with overcurrent protection ✅ Unit interface extension 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #Hardware #Makers #Grove #Connector #DIYProjects

#M5StackNew 🎉 Unit NFC Released Unit NFC is a near-field communication read/write unit operating at 13.56 MHz. ✨Features ✅13.56 MHz high-frequency near-field communication ✅Equipped with ST25R3916 high-performance IC ✅Supports ISO14443A, ISO14443B, FeliCa™, and ISO15693 protocols ✅Supports three operating modes: Reader/Writer / Card Emulation / Custom Protocol 🛒 Get Yours: Shopify: #M5Stack #M5StackNew #NFC #RFID #ST25R3916 #IoT #Hardware #Makers #SmartAccess #Security

#M5StackNew 🎉 Chain MIC Released Chain MIC is a sound acquisition node in the M5Stack Chain series, supports sampling of sound signals and threshold triggering and is suitable for environmental sound detection, voice-controlled interaction, and device status indication. ✨Features ✅STM32G031G8U6 main controller, UART serial daisy-chain communication protocol ✅GMI4015P-2C microphone sound acquisition ✅Supports 12-bit ADC sampling of sound signals and threshold triggering ✅2 x HY2.0-4P expansion interfaces for connecting Chain series devices 🛒Get Yours: Official Store: #M5Stack #M5StackNew #ChainMIC #IoT #SoundDetection #Makers

#M5StackNew 🎉 Stamp UWB & Stamp UWB F Released Stamp UWB & Stamp UWB F are ultra-compact embedded UWB ranging modules.  ✨Features ✅Integrated QM33120W UWB transceiver with enhanced secure Time-of-Flight mode and integrated AES-256 ✅Supports UWB Channel 9, IEEE 802.15.4-2020 / IEEE 802.15.4z-2020 BPRF ✅Supports TWR and TDoA positioning solutions ✅Supports 850 kbps / 6.81 Mbps wireless communication data rates * A 0.5mm-12P FPC connector is pre-soldered on the back of the module, allowing external connection through a 0.5mm-12P FPC cable. 🛒 Get Yours: Stamp UWB: Shopify: AliExpress: Stamp UWB F: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #UWB #Hardware #Makers

#M5StackNew 🎉 StamPLC AC Released StamPLC AC is an AC relay expansion module for the StamPLC host, integrating AC load control and entire system power supply to greatly simplify field wiring for industrial applications. ✨ Features ✅ Integrated power supply, control for simplified wiring and contact-type relay ✅ Built-in AC-DC isolated conversion circuit supporting AC 100 ~ 240V wide voltage input ✅ Programmable tri-color LED for status indication ✅ I2C protocol control, DIN rail / mounting hole installation 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #Hardware #Makers #IndustrialControl #RelayModule #Automation

#M5StackNew 🎉 Core2 v1.3 Released Core2 v1.3 is a highly integrated controller designed for IoT applications. This version is an iteration of Core2 v1.0, retaining the AXP192 power management IC while upgrading the 6-axis IMU on the rear expansion board to a BMI270. ✨Features ✅ ESP32-D0WDQ6-V3 Core (16MB Flash + 8MB PSRAM) ✅ 2.0" Color Capacitive Touchscreen, Built-in Speaker, Vibration Motor ✅ Upgraded BMI270 6-Axis IMU & PDM Microphone ✅ RTC Clock, AXP192 Power Management, 500mAh Lithium Battery 🛒 Get Yours: Shopify: #M5Stack #M5StackNew #IoT #Hardware #Makers #ESP32 #Core2 #TouchScreen #EmbeddedSystems #Automation

#M5StackNew 🎉 Stamp-AddOn Cam0308 & Cam3660 Released Stamp-AddOn Cam0308 & Cam3660 are CMOS camera expansion modules designed for the Stamp-S3Bat, equipped with a 0.3MP GC0308 / 3MP OV3660 image sensor.  ✨Features ✅Compatible with Stamp-S3Bat, 8-bit DVP parallel image output interface ✅0.3MP GC0308 / 3MP OV3660 CMOS image sensor ✅SCCB configuration bus (electrically compatible with I2C) ✅L-shaped flexible FPC with integrated 0.4mm-24P B2B board-to-board connector ✅Side metal mounting hole for easy installation and fastening 🛒 Get Yours: Stamp-AddOn Cam0308: Official Store: AliExpress: Stamp-AddOn Cam3660: Official Store: AliExpress: #M5Stack #M5StackNew #IoT #Hardware #Makers #EmbeddedVision #ImageCapture

#M5StackNew 🎉Core2 For AWS v1.3 Released Core2 For AWS v1.3 is a kit designed for AWS IoT learning and secure project development. It includes the M5Stack Core2 main controller and the Base M5GO Bottom2 v1.3 expansion base with an integrated encryption chip. ✨Features ✅ESP32-D0WDQ6-V3 core controller, built-in ATECC608 hardware encryption chip ✅16MB Flash, 8MB PSRAM, 2.4 GHz Wi-Fi ✅Built-in speaker, Power indicator LED, Vibration motor, RTC clock, Capacitive touchscreen, Built-in lithium battery ✅Dedicated peripheral expansion board, Built-in BMI270 6-axis IMU, PDM microphone ✅AXP192 power management, microSD slot, HY2.0-4P expansion interface 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #AWS #Hardware #Makers #ESP32

#M5StackNew 🎉StickS3 Released StickS3 is a compact yet high-performance programmable controller designed for remote control and IoT applications. ✨Features ✅Integrated ESP32-S3-PICO-1-N8R8 main controller ✅8MB Flash and 8MB PSRAM, ES8311 mono audio codec chip ✅MEMS microphone + speaker, Integrated IR transmitter + IR receiver ✅Magnetic back design, Expandable Hat2-Bus (2.54-16P), HY2.0-4P interface 🛒 Get Yours: Shopify: AliExpress: #M5Stack #M5StackNew #IoT #StickS3 #ESP32S3 #Hardware #Makers #RemoteControl #EmbeddedSystems

#M5StackNew 🎉 ToughC5 Released ToughC5 is an outdoor waterproof IoT controller designed for edge data collection, smart buildings, and industrial gateway applications. ✨ Features ✅ ESP32-C5HR8 Core Main Controller with 16MB Flash and 8MB PSRAM ✅ Dual-band Wi-Fi 6 (2.4 / 5 GHz), BLE 5, and IEEE 802.15.4 for Zigbee / Thread ✅ 2.0" 320 × 240 LCD with capacitive touch ✅ Onboard RTC, passive buzzer, microSD Card Slot, internal RS485, I2C, GPIO, and UART expansion ✅ PC + ABS housing material, resistant to UV aging, magnetic mounting 🛒 Get Yours: Official Store: AliExpress: #M5Stack #M5StackNew #ToughC5 #ESP32 #IoT #IndustrialIoT #EdgeComputing